Fan motor and Induction Motor Stator Semi-auto Winding Inserting Machine

Fan motor and Induction Motor Stator Semi-auto Winding Inserting Machine

(1) Technical data of stator winding inserting machine:

• Stator stack length: 10~200mm
• Stator OD: Max. 300mm
• Stator ID: 80~180mm
• Tooling traveling distance: Max.110mm
• Suitable wire material: copper/aluminium wire
• Slot number: 8~48slots
• Max. Slot filling rate: 80%
• Power: 380V/50/60HZ 3Kw
• Machine weight: about 350kg
• Machine dimension: L1500*W680*1100mm

(2) Application

Suitable for induction motor stator.

(3) Machine main function and characteristic

• The machine insert coil and wedge simultaneously, coil insertion is controlled by servo motor system.
• It is controlled by HMI, and machine can diagnose breakdown automatically.
• Both copper wire and aluminium wire are applicable.
• Production capacity ≤20s/set (exclude the man-hours for auxiliary work)
• Primary qualification rate for copper wire ≥98%, after rework, the rate ≥99.5%
• Wire pushing height and stop time can be set in the HIM interface.
• The machine has fixed foot and removable wheel.
• Wedge should not be damaged, no burr in the surface, no movement or slide.
• Wedge should not be damaged, no movement or slide. Copper wire should not be pull away from the paper.
• The stator should not be deformation or stator lamination should not be upward.

(4) Information needed for stator winding inserting machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Wire connection drawing
4. Stator application
5 Required productivity
6 Other technical requirement

Stator sample after doning inserting by this semi-auto winding inserting machine